> For clean Markdown of any page, append .md to the page URL. > For a complete documentation index, see https://docs.ouster.com/sensor-docs/guides/rev7/llms.txt. > For AI client integration (Claude Code, Cursor, etc.), connect to the MCP server at https://docs.ouster.com/sensor-docs/_mcp/server. # Rev 7 ## Docs - [Enhanced Ingress Protection](https://docs.ouster.com/sensor-docs/guides/rev7/ingress-protection.md): Installing the connector boot kit, self-vulcanizing tape, and drip loops to preserve long-term connector ingress protection in outdoor installations. - [Thermal Integration Guide](https://docs.ouster.com/sensor-docs/guides/rev7/thermal-integration.md): Overview and terminology for integrating Ouster sensors with custom heatsinks. - [Performance Of Standard Design](https://docs.ouster.com/sensor-docs/guides/rev7/thermal-heat-sources.md): Where heat originates in Ouster sensors and how it dissipates through standard and clamshell heatsinks. - [Thermal Integration Best Practices](https://docs.ouster.com/sensor-docs/guides/rev7/thermal-best-practices.md): Design guidelines for custom heatsink integrations including material selection, torque values, and thermal interface materials. - [Max Operating Temperatures](https://docs.ouster.com/sensor-docs/guides/rev7/thermal-max-operating-temp.md): Maximum chassis and air operating temperatures for Ouster sensor hardware revisions with firmware v2.5.x and v3.1.x. - [Thermal Alerts & Appendix](https://docs.ouster.com/sensor-docs/guides/rev7/thermal-alerts.md): Shot limiting stages, thermal shutdown behavior, thermal model specifications, and supplemental load cases for Ouster sensors.